Max Trainer M7 Assembly Video

Video Transcript:

BowFlex Max Trainer M7 Assembly Video. This video was intended to be a supplement to the assembly manual provided with your product. Please be sure to read your assembly manual thoroughly as it contains important safety warnings and assembly tips.

Step 1: before beginning assembly, please open all boxes to confirm that all parts necessary are present.
Step 2: attach the rail assembly to the frame. This should be done using four socket head screws and washers. Hardware should only be hand-tightened during this step. Because some components are heavy and awkward, we recommend using two people to complete the next couple of steps.
Step 3: release the frame from the shipping plate using a 13 millimeter wrench.
Step 4: attach levelers to the stabilizer assembly.
Step 5: have the second person carefully lift the frame assembly and attach to the stabilizer assembly by hand-tightening four socket head screws and washers. Beginning with the hardware from step two, go back and tighten all the hardware.
Step 6: attach stabilizer shrouds to the frame assembly.
Step 7: using a phillips head screw, attach the rear shroud to the frame assembly. Then, insert the caps.
Step 8: attach the leg assembly with a socket head screw, washer, and cap. Repeat on the other side. Please note, once leg assemblies are connected, if one moves the other does as well.
Step 9: attach the pedal to the leg assembly using two socket head screws, washer, and nut. Repeat on the other side.
Step 10: cut the shipping zip ties from the foot pads. Attach the foot pads to the pedal assembly using four socket head screws. Repeat on the other side.
Step 11: cut the shipping zip tie from cables and attach cables to console assembly. Attach the console assembly to the main mast. Tighten all the hardware.
Step 12: attach the upper handle bars to the frame assembly.
Step 13: connect the AC adapter to the frame assembly.
Step 14: inspect your machine carefully making sure that all hardware is tight and components are installed properly before using your product.
Enjoy your new BowFlex Max Trainer M7!